Our tiny new G Force MicroSensor have two modes: it works standalone with no additional equipment required, as well reviving up your eLogger, our OSD and OSD Pro products, and our PowerPanel LCD for full data logging and display.
For standalone mode, simply plug the sensors into a spare receiver channel or small battery (3V to 16V) and fly your model. Then, when you land, your maximum G will display on the built-in 7 segment LED. No configuration, additional equipment, or computer required!
Or, connect your MicrosensorTM to any of our eLogger products for full logging and graphing of your flight’s G forces!
The tiny, low cost sensors are factory calibrated, and measure G's in the X, Y, and Z axes during flight, and the maximum encountered forces on each axis (in 10ths of G's) are displayed on the built-in 7 segment LED.
The low G sensor measures up to 8G (at least 7G) in each of the 3 axes.
- Resolution: approx. 0.05 G in each axis
- Power input (Standalone Mode) : 4V to 16V
- Weight: approximately 4 grams (0.15 oz)
- Dimensions: approximately 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”)
- Precalibrated – no user calibration required
Click here to view the G-Force user manual.
