GEP-RC TX5 (210mm) ARTF

Drone Racer based on GEP-RC TX5 frame and SP Racing F3 controller and made ARTF by Helitech Japan. You just need to set your Futaba or S-FHSS transmitter and a Lipo 4 cells (4s 1300mAh advised) batterie to fly.

• GEP-RC TX5 2100mm frame
• SP Racing F3 controller (Firmware June 30 2017) set using cleanflight
• Afro 20S 4in 1 ESC
• Scorpion 2205-2350Kv power system
• RunCam Eagle 800TVL camera
• Foxeer TN25 VTX
• Tarot RSFSB reciever. Futaba S-FHSS compatible.

You will need to bind your transmitter with the reciever first. Then generally on Futaba transmitter channels 1 and 3 need to be reverse. Please check in Cleanflight Reciever tab for proper channel direction. Then you can use Mode tab to set switch for auxilary channels accordingly.